Stair Tread Parts  

Custom Fine Trim Moulding Manufacturers

Custom Fine Trim Mouldings to
Stair Tread Parts
We've Got It All!

Frequently Asked Questions

What types of wood do you use?

We are able to use any type of wood available, as well as some man made materials.

Do you install custom fine trim mouldings?

No, but our pieces are designed so that your local carpenter can easily slip it right into place. We allow 6"-8" of extra material per side to allow for mitre cuts to the existing trim.


How do I measure my arched space?

There are a number of different types of arched openings. How you measure varies according to the type of arch that you have.

  • A full round is measured from the inside of the jamb to the inside of jamb, then add the desired reveal. Measure top/bottom and left/right to make sure they match all the way around.
  • A half round is measured from the inside of the jamb to the inside of jamb, then add the desired reveal.
  • Segmented circles (eye brows), Ovals and ellipticals require a pencil line template from inside of jamb extension after the window has been installed. Please do not cut out the line. Leave at least 2 inches on both sides of the line.

What is a "reveal?"

The reveal is the amount of space to be shown of the jamb after the trim is installed.
Arched Casings Reveal
We suggest an 1/8, 3/16, or 1/4 reveal.

Circular Window Casing
Full Round

Half Round Window Casing
Half Round

Elliptical Window Casing


Is there an easier way to get my measured space?

If your window is newly installed ask the window manufacturer what the model # is. We are often able to get your casing measurement from that.

What is an elliptical arch?

An elliptical arch has a continuously changing radius.

How do I send you a template?

We prefer that you draw your template onto cardboard or resin paper, roll it up and ship it to us in a sleeve. Make sure not to cut along the drawn line. Eyebrow arches do not require a template.

You don't offer my profile. Can you supply my custom fine trim mouldings?

Absolutely! The first question we would ask is do we have any profiles that are close to what you are looking for? If so, we can save you some money by providing that curve and finishing off the entire opening with the straight pieces to match the profile. If, however, you are set on a specific look we are able to grind a set of custom knives to use to design your custom work. That cost would be an additional $100-$300 depending upon the width of the profile.

What will you need to match my existing moulding?

We must have a sample of the profile in order to create a custom knife to match it exactly.

How do you ship my custom fine trim mouldings?

We use UPS or FedEx for shipping typical orders, or an over the road common carrier for larger sizes. We will ship anywhere you require. Our pieces are wrapped in a plastic sleeve, and then in cardboard, followed by 1/8" foam. This ensures that your custom fine trim mouldings will arrive in excellent condition.

Do you stain your products?

We do not offer staining services at this time, however we will, upon request, prime pieces that will be painted.